See the chart below to see how different types of solar panel installations compare in Butler.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day).
* See glossary & definitions below.
Based on historical Butler, PA data, solar panels that are tilted towards the equator at an angle equal to the latitude will produce the maximum solar energy output in Butler. [1]
Butler has an average monthly Global Horizontal Irradiance (GHI) of 3.78 kilowatt hours per square meter per day (kWh/m2/day), which is approximately 11% greater than the average monthly Direct Normal Irradiance (DNI) of 3.42 kWh/m2/day. [1]
Solar installations in Butler that are always titled at the latitude of Butler (Average Tilt at Latitude or ATaL) average 4.3 kWh/m2/day, or about 14% greater than the average monthly GHI of 3.78 kWh/m2/day and approximately 26% greater than the average monthly DNI of 3.42 kWh/m2/day. [1]
Global Horizontal Irradiance: The total amount of solar radiation that is received per unit area by a surface that is always positioned in a horizontal manner.
Direct Normal Irradiance: The total amount of solar radiation received per unit area by a surface that is always perpendicular to the sun rays that come in a straight line from the direction of the sun at its current position in the sky.
Average Tilt at Latitude: The total amount of solar radiation received per unit area by a surface that is tilted toward the equator at an angle equal to the current latitude. ATaL will often produce the optimum energy output.
See the chart below for monthly solar radiation levels in Butler.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day)
Butler, PA has a average annual solar radiation value of 4.5 kilowatt hours per square meter per day (kWh/m2/day). [1]
The month with the highest historical solar radition values in Butler is August with an average of 5.76 kWh/m2/day, followed by July at 5.68 kWh/m2/day and May at 5.54 kWh/m2/day. [1]
The three months that historically average the lowest average solar radiation levels in Butler (Pennsylvania) are December with an average of 2.53 kWh/m2/day, followed by January with an average of 2.69 kWh/m2/day and November at 3.34 kWh/m2/day. [1]
The average monthly solar radiation level in Butler, PA, of 4.5 kilowatt hours per square meter per day (kWh/m2/day) is approximately 15% greater than the average level of 3.93 kWh/m2/day in a city with historically low levels (WA) and is approximately 32% less than the average level of 6.61 kWh/m2/day in a city with historically high levels (NV). [1]
→ Values listed as 0 (zero) are not available (N/A).
Below is a month-by-month comparison of how average Butler solar radiation levels compare to average levels in a city with historcially high levels (NV) and a city with historically low levels (WA). [1]
→ k/m/d = kWh/m2/day = kilowatt hours per square meter per day.
→ Values listed as 0 (zero) are not available (N/A).
We do not currently have data on solar panel installations in the city of Butler, PA at this current time.
Monthly AC solar system output averages for Butler (pa). Month-by-month solar power, as ranked by AC output, in Butler. [2]
* Amounts listed in kWhac (kilowatt hours (AC))
Butler (PA) has a average annual solar AC output value of 4981.93 kilowatt hours (AC). [2]
The month with the highest historical solar power output in Butler is August with an average of 518.8 kWhac, followed by May at 513.39 kWhac and July at 505.15 kWhac. [2]
The three months that historically average the lowest average solar output levels in Butler (Pennsylvania) are December with an average of 254.58 kWhac, followed by January with an average of 276.66 kWhac and November at 315.14 kWhac. [2]
Sorry, Butler residential electricity prices are currently unavailable.
Please check back later.
Vote now: Given all of the data and analysis provided for Butler, is solar power a good choice for residents of this city?
Sorry, Pennsylvania residential natural gas prices are currently unavailable.
Please check back later.
|
|
The city of Butler, PA in Butler County has an approximate population of 13,757. [6]
To learn more about solar energy and solar power Butler, PA, or for more solar-related resources for Butler, visit the U.S. Energy Information Administration.
Nineteen-year-old Edmund Becquerel, a French experimental physicist, discovered the basis of solar energy in 1839.
Take the first step toward powering your home with solar energy.
Start now with an online solar savings estimate.
