See the chart below to see how different types of solar panel installations compare in Matthews.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day).
* See glossary & definitions below.
Based on historical Matthews, NC data, solar panels that are tilted towards the equator at an angle equal to the latitude will produce the maximum solar energy output in Matthews. [1]
Matthews has an average monthly Global Horizontal Irradiance (GHI) of 4.52 kilowatt hours per square meter per day (kWh/m2/day), which is approximately 2% less than the average monthly Direct Normal Irradiance (DNI) of 4.62 kWh/m2/day. [1]
Solar installations in Matthews that are always titled at the latitude of Matthews (Average Tilt at Latitude or ATaL) average 5.19 kWh/m2/day, or about 15% greater than the average monthly GHI of 4.52 kWh/m2/day and approximately 12% greater than the average monthly DNI of 4.62 kWh/m2/day. [1]
Global Horizontal Irradiance: The total amount of solar radiation that is received per unit area by a surface that is always positioned in a horizontal manner.
Direct Normal Irradiance: The total amount of solar radiation received per unit area by a surface that is always perpendicular to the sun rays that come in a straight line from the direction of the sun at its current position in the sky.
Average Tilt at Latitude: The total amount of solar radiation received per unit area by a surface that is tilted toward the equator at an angle equal to the current latitude. ATaL will often produce the optimum energy output.
See the chart below for monthly solar radiation levels in Matthews.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day)
Matthews, NC has a average annual solar radiation value of 5.39 kilowatt hours per square meter per day (kWh/m2/day). [1]
The month with the highest historical solar radition values in Matthews is April with an average of 5.92 kWh/m2/day, followed by September at 5.88 kWh/m2/day and June at 5.85 kWh/m2/day. [1]
The three months that historically average the lowest average solar radiation levels in Matthews (North Carolina) are December with an average of 4.23 kWh/m2/day, followed by January with an average of 4.6 kWh/m2/day and February at 4.93 kWh/m2/day. [1]
The average monthly solar radiation level in Matthews, NC, of 5.39 kilowatt hours per square meter per day (kWh/m2/day) is approximately 37% greater than the average level of 3.93 kWh/m2/day in a city with historically low levels (WA) and is approximately 18% less than the average level of 6.61 kWh/m2/day in a city with historically high levels (NV). [1]
→ Values listed as 0 (zero) are not available (N/A).
Below is a month-by-month comparison of how average Matthews solar radiation levels compare to average levels in a city with historcially high levels (NV) and a city with historically low levels (WA). [1]
→ k/m/d = kWh/m2/day = kilowatt hours per square meter per day.
→ Values listed as 0 (zero) are not available (N/A).
We do not currently have data on solar panel installations in the town of Matthews, NC at this current time.
Monthly AC solar system output averages for Matthews (nc). Month-by-month solar power, as ranked by AC output, in Matthews. [2]
* Amounts listed in kWhac (kilowatt hours (AC))
Matthews (NC) has a average annual solar AC output value of 5845.7 kilowatt hours (AC). [2]
The month with the highest historical solar power output in Matthews is March with an average of 538.96 kWhac, followed by April at 523.69 kWhac and May at 514.97 kWhac. [2]
The three months that historically average the lowest average solar output levels in Matthews (North Carolina) are December with an average of 415.25 kWhac, followed by February with an average of 424.68 kWhac and January at 449.49 kWhac. [2]
Sorry, Matthews residential electricity prices are currently unavailable.
Please check back later.
Vote now: Given all of the data and analysis provided for Matthews, is solar power a good choice for residents of this town?
Sorry, North Carolina residential natural gas prices are currently unavailable.
Please check back later.
|
|
The town of Matthews, NC in Mecklenburg County has an approximate population of 27,198. [6]
To learn more about solar energy and solar power Matthews, NC, or for more solar-related resources for Matthews, visit the U.S. Energy Information Administration.
Nineteen-year-old Edmund Becquerel, a French experimental physicist, discovered the basis of solar energy in 1839.
Take the first step toward powering your home with solar energy.
Start now with an online solar savings estimate.
