Based on historical Marble, MN data, solar panels that are tilted towards the equator at an angle equal to the latitude will produce the maximum solar energy output in Marble.[1]
Marble has an average monthly Global Horizontal Irradiance (GHI) of 3.64 kilowatt hours per square meter per day (kWh/m2/day), which is approximately 11% less than the average monthly Direct Normal Irradiance (DNI) of 4.11 kWh/m2/day. [1]
Solar installations in Marble that are always titled at the latitude of Marble (Average Tilt at Latitude or ATaL) average 4.47 kWh/m2/day, or about 23% greater than the average monthly GHI of 3.64 kWh/m2/day and approximately 9% greater than the average monthly DNI of 4.11 kWh/m2/day. [1]
Solar Energy Glossary
Global Horizontal Irradiance (GHI)
Global Horizontal Irradiance: The total amount of solar radiation that is received per unit area by a surface that is always positioned in a horizontal manner.
Direct Normal Irradiance (DNI)
Direct Normal Irradiance: The total amount of solar radiation received per unit area by a surface that is always perpendicular to the sun rays that come in a straight line from the direction of the sun at its current position in the sky.
Average Tilt at Latitude (ATaL)
Average Tilt at Latitude: The total amount of solar radiation received per unit area by a surface that is tilted toward the equator at an angle equal to the current latitude. ATaL will often produce the optimum energy output.
Solar Radiation Levels in Marble
Solar Radiation Data in Marble, MN
See the chart below for monthly solar radiation levels in Marble.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day)
Solar Radiation Analysis for Marble, MN
Marble, MN has a average annual solar radiation value of 4.68 kilowatt hours per square meter per day (kWh/m2/day). [1]
The month with the highest historical solar radition values in Marble is July with an average of 6.28 kWh/m2/day, followed by April at 5.78 kWh/m2/day and August at 5.73 kWh/m2/day. [1]
The three months that historically average the lowest average solar radiation levels in Marble (Minnesota) are December with an average of 2.77 kWh/m2/day, followed by November with an average of 2.9 kWh/m2/day and January at 3.23 kWh/m2/day. [1]
Solar Power Comparison: Marble vs. the U.S.
Solar Power Levels in Marble
The average monthly solar radiation level in Marble, MN, of 4.68 kilowatt hours per square meter per day (kWh/m2/day) is approximately 19% greater than the average level of 3.93 kWh/m2/day in a city with historically low levels (WA) and is approximately 29% less than the average level of 6.61 kWh/m2/day in a city with historically high levels (NV). [1]
→ Values listed as 0 (zero) are not available (N/A).
Solar Power: Marble vs. the U.S.
Below is a month-by-month comparison of how average Marble solar radiation levels compare to average levels in a city with historcially high levels (NV) and a city with historically low levels (WA). [1]
→ k/m/d = kWh/m2/day = kilowatt hours per square meter per day.
→ Values listed as 0 (zero) are not available (N/A).
We do not currently have data on solar panel installations in the city of Marble, MN at this current time.
Solar Power Output in Marble
The Power of Solar in Marble, MN
Monthly AC solar system output averages for Marble (mn). Month-by-month solar power, as ranked by AC output, in Marble. [2]
* Amounts listed in kWhac (kilowatt hours (AC))
Solar Output Analysis for Marble, MN
Marble (MN) has a average annual solar AC output value of 5443.23 kilowatt hours (AC). [2]
The month with the highest historical solar power output in Marble is July with an average of 583.03 kWhac, followed by April at 558.27 kWhac and March at 543.79 kWhac. [2]
The three months that historically average the lowest average solar output levels in Marble (Minnesota) are December with an average of 292.54 kWhac, followed by November with an average of 294.88 kWhac and January at 347.64 kWhac. [2]
Cost of Utilities in Marble
Marble Electricity Costs
Sorry, Marble residential electricity prices are currently unavailable.
Please check back later.
Solar Power Poll: Marble
Vote now: Given all of the data and analysis provided for Marble, is solar power a good choice for residents of this city?
Marble Natural Gas Costs
Sorry, Minnesota residential natural gas prices are currently unavailable.
The city of Marble, MN in Itasca County has an approximate population of 701. [6]
Marble, MN Solar Energy
To learn more about solar energy and solar power Marble, MN, or for more solar-related resources for Marble, visit the U.S. Energy Information Administration.
Did you know?
The largest solar power plant in the world covers 1000 acres & is located in the Mojave Desert in California.