See the chart below to see how different types of solar panel installations compare in Danville.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day).
* See glossary & definitions below.
Based on historical Danville, CA data, solar panels that are tilted towards the equator at an angle equal to the latitude will produce the maximum solar energy output in Danville. [1]
Danville has an average monthly Global Horizontal Irradiance (GHI) of 5.05 kilowatt hours per square meter per day (kWh/m2/day), which is approximately 11% less than the average monthly Direct Normal Irradiance (DNI) of 5.68 kWh/m2/day. [1]
Solar installations in Danville that are always titled at the latitude of Danville (Average Tilt at Latitude or ATaL) average 5.77 kWh/m2/day, or about 14% greater than the average monthly GHI of 5.05 kWh/m2/day and approximately 2% greater than the average monthly DNI of 5.68 kWh/m2/day. [1]
Global Horizontal Irradiance: The total amount of solar radiation that is received per unit area by a surface that is always positioned in a horizontal manner.
Direct Normal Irradiance: The total amount of solar radiation received per unit area by a surface that is always perpendicular to the sun rays that come in a straight line from the direction of the sun at its current position in the sky.
Average Tilt at Latitude: The total amount of solar radiation received per unit area by a surface that is tilted toward the equator at an angle equal to the current latitude. ATaL will often produce the optimum energy output.
See the chart below for monthly solar radiation levels in Danville.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day)
Danville, CA has a average annual solar radiation value of 5.89 kilowatt hours per square meter per day (kWh/m2/day). [1]
The month with the highest historical solar radition values in Danville is August with an average of 7.4 kWh/m2/day, followed by July at 7.3 kWh/m2/day and September at 7.19 kWh/m2/day. [1]
The three months that historically average the lowest average solar radiation levels in Danville (California) are January with an average of 3.94 kWh/m2/day, followed by December with an average of 4.09 kWh/m2/day and February at 4.45 kWh/m2/day. [1]
The average monthly solar radiation level in Danville, CA, of 5.89 kilowatt hours per square meter per day (kWh/m2/day) is approximately 50% greater than the average level of 3.93 kWh/m2/day in a city with historically low levels (WA) and is approximately 11% less than the average level of 6.61 kWh/m2/day in a city with historically high levels (NV). [1]
→ Values listed as 0 (zero) are not available (N/A).
Below is a month-by-month comparison of how average Danville solar radiation levels compare to average levels in a city with historcially high levels (NV) and a city with historically low levels (WA). [1]
→ k/m/d = kWh/m2/day = kilowatt hours per square meter per day.
→ Values listed as 0 (zero) are not available (N/A).
We do not currently have data on solar panel installations in the town of Danville, CA at this current time.
Monthly AC solar system output averages for Danville (ca). Month-by-month solar power, as ranked by AC output, in Danville. [2]
* Amounts listed in kWhac (kilowatt hours (AC))
Danville (CA) has a average annual solar AC output value of 6573.49 kilowatt hours (AC). [2]
The month with the highest historical solar power output in Danville is August with an average of 683.12 kWhac, followed by July at 677.5 kWhac and September at 647.95 kWhac. [2]
The three months that historically average the lowest average solar output levels in Danville (California) are January with an average of 387.24 kWhac, followed by February with an average of 395.91 kWhac and December at 404.56 kWhac. [2]
Sorry, Danville residential electricity prices are currently unavailable.
Please check back later.
Vote now: Given all of the data and analysis provided for Danville, is solar power a good choice for residents of this town?
Sorry, California residential natural gas prices are currently unavailable.
Please check back later.
|
|
The town of Danville, CA in Contra Costa County has an approximate population of 42,039. [6]
To learn more about solar energy and solar power Danville, CA, or for more solar-related resources for Danville, visit the U.S. Energy Information Administration.
Solar cells convert sunlight into electricity through a physical process known as the photovoltaic effect.
Take the first step toward powering your home with solar energy.
Start now with an online solar savings estimate.
